MSR glands
The MCT Brattberg MSR Gland is a pressure fixed gland, tested up to 15 bar , developed for the rapid passage of cables or pipes in an existing steel wall. In addition to pressure-resistant, the MSR cable gland is also A60 fire-retardant. To apply the MSR cable gland, only a custom hole needs to be drilled in the steel wall or floor. Welding is not necessary, which saves a lot of time. The MSR Cable gland is available in galvanized steel (stainless steel on request).
The MSR Swivel, is available in ten standard variants. Deviating sizes are available in consultation. The MSR Gland range is suitable for cables from 4 to 32 mm. In addition to single-cable glands, multi-cable glands (up to 8) are also available.
Transit for existing steel walls without welding
The MSR Cable Gland consists of a threaded steel housing , a gasket, a sealing nut and a filler element. The filling element is made of silicone rubber and finished with stainless steel 316L mounting parts. The rubber of the MSR Gland consists of a core, or several cores, and 1 or more round rings, which can be removed to be able to seal the cable(s) appropriately. If the core is not removed, the MSR Gland can also be used, partly or completely, as a blind penetration.
After the MSR Cable gland has been made suitable for the cables to be fed through, by removing each core and possibly 1 or more rubber rings around the core, the cables can be easily fixed by tightening the Allen screws, which are located on the round filler element. .
In order to feed through existing cables, the rubber parts of MSR Wartel can be supplied cut or opened on site using a box cutter.
Types and cables
| Type | MIN(mm) | MAX (mm) | Number of cables |
| MSR20-1 | 4 | 12 | 1 |
| MSR40-1 | 11 | 24 | 1 |
| MSR40-2 | 6 | 15 | 2 |
| MSR40-3 | 6 | 12 | 4 |
| MSR50-1 | 4 | 10 | 5 |
| MSR50-2 | 4 | 16 | 3 |
| MSR50-3 | 20 | 32 | 1 |
| MSR63-1 | 4 | 16 | 4 |
| MSR63-2 | 4 | 10 | 8 |
